IBC light proof ton bucket 1000L (black)

Size: 1200 * 1000 * 1150mm

Filling diameter: 150mm

Discharge valve: DN50

Weight: 56 ± 1kg

1、 The nominal container of this container is 1000 liters, and the filling temperature is less than 60C. Chemical compatibility confirmation: This container is made of high-density polyethylene grease. Before use, the chemical compatibility of the filled liquid with the container should be confirmed first. If you have any questions about compatibility, you can consult our company's technical department. We are not responsible for compatibility problems caused by self filling of unconfirmed inner liquid. 3、 Filling and storage: 1. Open the top cover and insert a tube with an outer diameter less than 142mm for filling. 2. Tighten all caps with seals before transportation. 3. Container containers should be placed in a clean and away from heat sources, avoiding direct sunlight. The minimum storage temperature is -40 ° C. 4. The storage shelf life of the container is five years from the date of production. 4、 Discharge: 1. This container adopts a self weight discharge design. When discharging, the top filling cap must be opened first to prevent negative pressure inside the container. 2. Loosen the screw cover of the discharge valve, tear off the aluminum foil used for sealing. If using a valve bend, place it on the screw cover and install it together with a gasket on the discharge port of the valve. Tighten the screw by hand. 3. Remove the locking screw from the lower part of the drain valve handle, and then move the valve handle clockwise to start discharging. 4. After the liquid discharge is completed, close the valve counterclockwise, screw on the discharge port cover and filling port cover, and reset the locking buckle. 5、 Transportation and loading: 1. When using this container to package dangerous goods for long-distance transportation, it is necessary to comply with the provisions of the International Maritime Dangerous Goods Regulations Supplementary to this [Guidelines for Loading of Freight Transport Components]. 6、 Instructions for use: 1. The lifting method of this container is bottom lifting, and top lifting is not allowed. 2. It is strictly prohibited for the valve to receive external impact and collision. 3. When using IBC again, careful inspection should be carried out to ensure that all components are functioning properly